Multi Protocol Analyzer
LE-8200A
●Records data in the USB drive
●Battery Powered Handheld Troubleshooter for Field Testing
●5.7-inch TFT color display
●Supports TTL, I2C, SPI, IrDA,
●CAN, LIN, FlexRay, LAN and USB
●Mega Speed Mesurement
●Supports Logic Analyzer Analysis and Analog Waveform Analysis
●Outputs edited digital waveform.
The LE-8200A is the top-level model of battery-powered communications protocol analyzer. The LE-8200A has an enlarged display in response to an increasing demand without degrading the excellent portability of the LE Series. It is ideal for development tests of communications systems and industrial equipment, as well as for after-sale services and communication trouble analysis. LE-series have been used in the industries of railways, aviation, and a variety of manufactures for few decades where reliability is very important. With optional kits, it can be used for developing network, in-vehicle, PC peripheral, embedded devices. Unlike the software based analyzers, it cannot be affected by the capability of PC and can be used in the place where PC is not allowed.
| Item | Name | Remarks |
|---|---|---|
| Expansion kit for TTL/I2C/SPI | OP-SB85L | For 1.8/2.5/3.3/5V level TTL, I2C, and SPI |
| Expansion kit for current loop comm. | OP-SB85C | For current loop communication |
| Expansion kit for CAN/LIN | OP-SB87 | For CAN/LIN communciation |
| Expansion kit for CAN FD/CAN/CXPI | OP-SB87FD | For CAN FD/CAN/CXPI communciation |
| Expansion kit for Ethernet LAN | OP-SB89 | For Ethernet LAN communciation |
| Expansion kit for Gbit Ethernt LAN | OP-SB89G | For Gbit Ethernet LAN communciation |
| Expansion kit for Ethernet LAN(2ch) | OP-SB89E | For Ethernet LAN(2ch) communciation |
| Expansion kit for USB | OP-SB84 | For USB communciation |
| Firmware for high-speed HDLC/SPI | OP-FW12G | For high-speed HDLC/SPI communciation |
| Firmware for high-speed communciation | OP-FW12GA | Supports high-speed communication of UART and PROFIBUS. |
| 128GB CF card | CF-128GX | |
| 64GB CF card | CF-64GX | |
| 32GB CF card | CF-32GX | |
| 16GB CF card | CF-16GX | |
| 8GB CF card | CF-8GX | |
| 2GB CF card | CF-2GX | |
| DSUB25pin monitor cable | LE-25M1 | Note: same as the attached one |
| DSUB9pin monitor cable | LE-259M1 | For RS-232C of DSUB9 pin |
| Terminal for RS-530 | LE-530TB | Terminal block adapter for RS-422/485 |
| Terminal block for DSUB25pin | LE-25TB | Terminal block adapter (25terminals) for DSUB25pin connector |
| X.21 monitor cable | LE-25Y15 | For DSUB15 pin X.20/21. Y-type branch |
| RS-449 monitor cable | LE-25Y37 | For DSUB37 pin RS-449. Y-type branch |
| V.35 monitor cable | LE-25M34 | For M-type 34pin V.35 |
| DB9 monitor cable | LE-009M1 | Branch cable of DSUB9 pin |
| 3 wires prove cable | LE-3LP | Cable with clips applicable to the analog connectors of OP-SB85L |
| RS-530 cable | LE-25S530 | For RS-530 of DSUB25pin |
| I/O cable | LE-4TG | Note: same as the attached one |
| DSUB9pin AUX cable | LE2-8V | DSUB9pin female - mini DIN8pin，2.5m Note: same as the attached one |
| DSUB25pin AUX cable | LE2-8C | DSUB25pin male - miniDIN8pin，1.5m |
| AUX cable for DPU-414 | LE2-8P | DSUB9pin male - miniDIN8pin，1.5m |
| Printer set | DPU-414-PA | |
| PC link software | LE-PC800G | Note: This software does not support OP-SB84, OP-SB87, OP-SB87FD, OP-SB88, OP-SB89, OP-SB89G, and OP-SB89E. |
| PC link software | LE-PC87FD | For OP-SB87FD |
| PC link software | LE-PC87 | For OP-SB87 |
| USB cable | LE-US18 | 1.8m with A-B connector |
| Carrying bag | LEB-01 | Note: same as the attached one |
| Battery pack | P-20S | For replacement. Same as the attached one |