HOME > PRODUCT > Comparison table
PRODUCT

Portable Data Communication Analyzer Series

LINEEYE battery-powered protocol analyzers incorporate Monitoring, Simulation and BERT functions required for development of communication instruments and analysis of communication failures.

LE-8500X-RT / LE-8500XR-RT
  1. Max. speed for full duplex: 20Mbps (half duplex)
  2. 7 inches, color TFT display
  3. Multi-protocol support including ASYNC, HDLC, X.25, I2C, SPI, and TTL
  4. Possible to support LAN, CAN FD, CAN, High-speed Analog, and Single Pair Ethernet by using expansion kits
  5. Time stamp that allows time synchronization by GNSS (PPS) signal
  6. Automatically records communication logs to large-capacity external storage via USB3.0
  7. Arbitrary speed setting to 4 digits
  8. Remote control via Wi-Fi (for USA, Canada, EU, and Japan)
  9. Logic Analyzer function for delay analysis of bit level
LE-8200A / LE-8200  Finished Product
  1. Max. speed for full duplex: 2.150Mbps
  2. 5.7 inches, color TFT display
  3. Multi-protocol support including ASYNC, HDLC and X.25
  4. Possible to support USB, LAN, TTL, I2C, SPI, CAN FD, CAN, CXPI, LIN and Current Loop by using Expansion kits
  5. Arbitrary speed setting to 4 digits
  6. Logic Analyzer function for delay analysis of bit level
  7. Continuously records communications log data on a external memory
  8. Records data in the USB flash drive. (LE-8200A ONLY)
  9. Outputs edited digital waveform. (LE-8200A ONLY)
LE-3500XR / LE-2500XR
  1. Max. speed for full duplex: 2.048Mbps(LE-3500XR) / 1.000Mbps(LE-2500XR)
  2. 4.3 inch color touch screen
  3. Multi-protocol/interface support including ASYNC, HDLC, X.25, I2C, SPI, and TTL
  4. Possible to support CAN FD, CAN, CXPI, LIN and Current Loop by using Expansion kits
  5. Arbitrary speed setting to 4 digits
  6. Logic Analyzer function for delay analysis of bit level
  7. Continuously records communications log data on a external memory
  8. Remote control via Wi-Fi (for USA, Canada, EU, and Japan)
  9. Smaller and lighter than the conventional model

[ Specification ]
Model LE-8500X-RT/
LE-8500XR-RT
LE-8200/
LE-8200A
LE-3500XR LE-2500XR
Standard interface RS-232C(RS-530)
RS-422/485、TTL
RS-232C
RS-422/485(RS-530)
RS-232C, RS-422/485, TTL
+ Cables X.20/21, RS-449, V.35*1 -
+ Expansion kits Gbit LAN, PoE, CAN FD, CAN, High-speed Analog, and Single Pair Ethernet TTL, I2C, SPI, CAN FD, CAN, CXPI, LIN, Current Loop, LAN, EtherCAT, USB CAN FD, CAN, CXPI, LIN, Current Loop
+ Firmware
   for High-speed
Supports high-speed as standard HDLC(CC-Link), SPI, Profibus-DP, UART
Max. 12Mbps (20Mbps for SPI)
HDLC(CC-Link), SPI
Max. 10Mbps
-
Protocol ASYNC, BSC, SDLC, HDLC, X.25, PPP, Modbus, PROFIBUS、I2C,SPI, Synchronous clock
[NRZ/NRZI/FM0/FM1/Manchester0/Manchester1 can be specified ]
ASYNC, BSC, SDLC, HDLC, X.25, PPP, Synchronous clock, Modbus*2
[NRZ/NRZI/FM0/FM1 can be specified ]
Capture memory 1GB 100MB
Max. speed
( ) : half-duplex
10Mbps
(20Mbps)
2.150Mbps
 (4Mbps)
2.048Mbps
(3.150Mbps*3)
1Mbps
(1.544Mbps*3)
Statistical analysis Yes No
Simulation function 7 modes 6 modes /
7 modes
(LE-8200A)
6 modes 4 modes
Logic analyzer function Yes Max. 200MHz*3 Yes Max. 100MHz Yes Max. 50MHz*4
Statistic function Yes -
Eternal memory Max. 512GB Max. 128GB Max. 32GB
LCD display 7 inch color LCD 5.7 inch color LCD 4.3 inch TFT color display
Download Catalog/Leaflet
*1: For LE-3500XR/LE-2500XR an expansion board “OP-SB10N” (which has RS-530 port) is needed.
*2: LE-2500XR does not support Modbus.
*3: Version1.08 or later.
*4: Version1.04 or later.