--- LE-150PS/200PS Version history ---
PC Link Software (LE-LINK20) Version History

Correct the bug in which the terminate character of ASYNC frame cannot be set correctly.

Add the function of changing the recording files when reaching to the specific time in the Logger mode.
Correct the minor bug on the starting measurement.
Able to scroll by the tablet PC.

Improve the initial processing for the inner RTC (time clock IC)
If the initial setting of the RTC was changed for some reasons, power (current) consumption of the Lithium battery was increased.
Correct a bug on the search function.

If marking the check-box of "Check the firmware version before starting the measurement", LE-200PS/LE-150PS cannot start the measurement. (It happens on version 1.08 only)
Correct the bug of text conversion on EBCDIK.

Add a short-cut key on data search function.

Ctrl+F	:	Open the dialog of [Data Search]
F3	:	Search next data
Shift+F3	:	Search previous data.

Add the starting options.
-r"[name of configuration]"
After starting the LE-LINK20, selected analyzer which is set by the configuration
starts measuring automatically. (able to set more than one units)
-q
Adjust the format of data files to enable to read the files immediately.
Record in another data files after appointed time.
Add the character search in the search conditions.
The previous "Character search condition" is renamed as "Character (HEX) search condition".
The range of setting in LE-LINK20 and LE-LOGGER are both 2-1024.
Save the search conditions after closing the application.
Inform in massage that the firmware is not the latest version when starting the measurement.
Add the check boxes of abort and short frames in the trigger condition and search condition (Error).
(only LE-200PS supports)
Correct some other minor bugs.

Correct a bug that lost data marks ("LD","*Lost*") are recorded even though there is not any loss data.

Display each communication frame in different line for ASYNC/SYNC protocol.
(Break signal of ASYNC is displayed as “?b”)
Display property of measured data. [file menu] -> [data property]
Record model name, serial number and firmware information on the data file.
LE-150PS supports max. 8GB SDHC card.
Add cut/copy/paste data in the simulation function.
Able to select data table number “0-9” by TEN key. (Cannot use [Shift] plus TEN key).
Change the icon of tool bar to full color.
(In Windows 2000/ XP (classic), it will be the 16-color icon.)
Display the name of some icons by right clicking on tool bar.
Convert ASYNC measured data into CSV. Each frame is displayed in the different line.
Correct a minor bug of HDLC X.25 packet translation display. (LE-200PS only)
In the test conversion of LAPD frame translation, “None” is displayed when the last bit of RD is “0”.
In the previous version, “INFO” was displayed. (LE-200PS only)
Change the specification of “A1h” for EBCDIC and “7Fh”/ “BFh” for EBCDIK, to be same as other analyzers.

Correct the bug that measured data in the buffer is notsaved into a SD card during power failure when monitoring in Logger mode.
Correct the bug of trigger "send" command.

Add approx. 10s waiting time (blinking RUN LED) before turning off the power of analyzer automatically at AUTO RUN/STOP function.
Improve an extracting SYNC clock circuit for HDLC. (LE-200PS only)

Able to access to the SD card in higher speed. (Logger Mode)
Correct the bug that Auto RUN/STOP function (Monthly mode) does not work properly.
Correct the bug of logical status of external trigger input.

First public version

(First firmware version of analyzer is 1.02)