PRODUCT
Passive probe
P7100
Overview
This is a passive probe for an oscilloscope. This product is equivalent to the accessory of LINEEYE CAN analog measurement board.
[ Probe side ]
[ BNC connector part ]
[ Connection example ]
■Specifications
| Model number | P7100 |
|---|---|
| Type | Passive probe |
| Damping ratio | 1:1, 1:10 |
| Frequency band | 100MHz |
| Start-up time | 3.5n seconds |
| Maximum voltage | 150Vrms(×1)CAT Ⅱ, 300Vrms(×10)CAT Ⅱ*1 |
| Connector | BNC-P |
| Cable length | 1.2m |
| Compliant standard | CE |
*1: When using the probe damping ratio of 1:1 (x1) and connecting to the CAN/high-speed analog measurement expansion set SB-C2AN, Please note that the maximum withstand voltage of SB-C2AN is limited to ±30Vpk. When using this passive probe, please set the input impedance of SB-C2AN to 1MΩ.
[ Components ]
