HOME > PRODUCT > OP-SB89E
PRODUCT
Ethernet LAN (2ch) expansion kit
(supports EtherCAT)
(For LE-8200A/8200)

OP-SB89E

Specification
Specifications of OP-SB89E
Applicable Analyzer LE-8200A/LE-8200
Interface Port A,B,C,D*1: 100BASE-TX/10BASE-T
Monitor function Measures and logs the LAN frames which flow between the port A and B and between the port C and D.
Frame size: 60byte - 9Kbyte,
Time stamp (13 digits. Resolution: 1ms, 100µs, 10µs, 1µs, or 40ns can be specified)
Auto stop by external signal trigger
Recording Frame Max. 48,000 - 1,048,000 frames (equivalent to 100Mbyte)*2
Translation Translatable protocol: IPv4, ARP, ICMP, TCP, UDP, DHCP, EtherCAT
A software to convert the log file to pcap format is attached.*3
Filter function Monitoring of specified frames (such as MAC address, IP address etc.)
Auto save function Saves the captured data automatically into the external memory as communication log files.
Retrieval function Searches the specified frame and count it.
Delay time measurement function Measures the time lag between the receiving timings of specified ports in µs unit.
(Current, Max, Min, and Average delay times are displayed.)
Statistic function This function keeps statistics of 2 kinds of frame counters by specified interval, and display it in a graph.
It is possible to display all the frame counter values in real-time
PG function Up to 16 types of arbitrary packets can be sent from port A or port B for the specified number of times or continuously
Frame gap can be specified for each packet (wire-rate output is also available)
PING function It sends a PING command from port A or port B for about 30,000 times and displays the response count and response time.
You can specify the command transmission interval (10ms, 50ms, 100ms, 500ms, 1s), timeout time (10ms, 50ms, 100ms, 500ms, 1s, 5s, 10s), and payload length (0 to 900).
Port Blink function Make periodically blink the link LED of the hub connected with the board.
Accessories Interface expansion board, Line state sheet, LAN cable, Utility CD
*1: The circuit between the ports are a fail-safe tap.
*2: Recorded with 12 bytes of additional information for each frame.
*3: The software for conversion into pcap format works on Windows 7/8.1/10 PC.