PRODUCT
Portable Data Communication Analyzer Series
LINEEYE battery-powered protocol analyzers incorporate Monitoring, Simulation and BERT functions required for development of communication instruments and analysis of communication failures.
LE-8200A / LE-8200
- Max. speed for full duplex: 2.150Mbps
- 5.7 inches, color TFT display
- Multi-protocol support including ASYNC, HDLC and X.25
- Possible to support USB, LAN, TTL, I2C, SPI, CAN FD, CAN, CXPI, LIN and Current Loop by using Expansion kits
- Arbitrary speed setting to 4 digits
- Logic Analyzer function for delay analysis of bit level
- Continuously records communications log data on a external memory
- Records data in the USB flash drive. (LE-8200A ONLY)
- Outputs edited digital waveform. (LE-8200A ONLY)
LE-3500XR / LE-2500XR
- Max. speed for full duplex: 2.048Mbps(LE-3500XR) / 1.000Mbps(LE-2500XR)
- 4.3 inch color touch screen
- Multi-protocol/interface support including ASYNC, HDLC, X.25, I2C, SPI, and TTL
- Possible to support CAN FD, CAN, CXPI, LIN and Current Loop by using Expansion kits
- Arbitrary speed setting to 4 digits
- Logic Analyzer function for delay analysis of bit level
- Continuously records communications log data on a external memory
- Remote control via Wi-Fi (for USA, Canada, EU, and Japan)
- Smaller and lighter than the conventional model
LE-1500R
- Max. speed for full duplex: 500Kbps
- Entry model of simple operation only for ASYNC test
- Possible to support Current Loop by using Expansion kits
- Easy-to-use Simulation Function
- Auto Configuration
- Translation display of PPP communication
- Remote control via Wi-Fi (for USA, Canada, EU, and Japan)
[ Specification ]
Model | LE-8200/ LE-8200A |
LE-3500XR | LE-2500XR | LE-1500R |
---|---|---|---|---|
Standard interface | RS-232C, RS-422/485(RS-530) | RS-232C, RS-422/485, TTL | ||
+ Cables | X.20/21, RS-449, V.35*1 | - | ||
+ Expansion kits | TTL, I2C, SPI, CAN FD, CAN, CXPI, LIN, Current Loop, LAN, EtherCAT, USB | CAN FD, CAN, CXPI, LIN, Current Loop | Current Loop | |
+ Firmware for High-speed |
HDLC(CC-Link), SPI, Profibus-DP, UART Max. 12Mbps (20Mbps for SPI) |
HDLC(CC-Link), SPI Max. 10Mbps |
- | - |
Protocol | ASYNC, BSC, SDLC, HDLC, X.25, PPP, Synchronous clock, Modbus*2 [NRZ/NRZI/FM0/FM1 can be specified ] |
ASYNC, ASYNC PPP |
||
Capture memory | 100MB | 32MB | ||
Max. speed ( ) : half-duplex |
2.150Mbps (4Mbps) |
2.048Mbps (3.150Mbps*3) |
1Mbps (1.544Mbps*3) |
500Kbps (500Kbps) |
Max. speed at BERT | 4Mbps | 2.048Mbps | 1Mbps | 500Kbps |
Statistical analysis | Yes | Yes | No | |
Simulation function | 6 modes / 7 modes (LE-8200A) |
6 modes | 4 modes | 3 modes |
Logic analyzer function | Yes Max. 100MHz | Yes Max. 50MHz*3 | Yes Max. 20MHz | |
Statistic function | Yes | - | ||
Eternal memory | Max. 128GB | Max. 32GB | Max. 16GB | |
LCD display | 5.7 inch color LCD | 4.3 inch TFT color display | Monochrome LCD with back-light | |
Download Catalog/Leaflet | - |
*1: For LE-3500XR/LE-2500XR an expansion board “OP-SB10N” (which has RS-530 port) is needed.
*2: LE-2500XR does not support Modbus.
*3: Version1.04 or later.