GUIDE
LINEEYE Co., Ltd released the new protocol analyzer "LE-1500R", a low-cost analyzer for asynchronous communication of RS-232C/RS-422/RS-485 and TTL (1.8V-5V signal level).
LE-1500R
|
Asynchronous communication of RS-232C or RS-485 is still used extensively for the field of control devices or measurement instruments, and a low-cost communication analyzer to analyze problems of those fields has been needed.
The previous model "LE-1500" has RS-232C port and RS-422/485 port but this time LINEEYE Co., Ltd released "LE-1500R" which has TTL measurement port besides those port. With the standard TTL(1.8V-5V signal level) measurement port you can monitor TTL communication without using TTL expansion kit which is needed for TTL monitoring by the previous model LE-1500. While it succeeds the proven online monitor function, simulation function, and BERT (bit error rate test) function, we added more internal buffer memory and SD card/USB flash interface for its storage media. Also we added Wi-Fi function and you can remotely monitor the line from your PC by using Wi-Fi (note: Wi-Fi function is valid only in Japan, USA, and Canada). Besides that, we added a light edition of the optional PC link software (with a little bit limitaion) as a standard accessory. The PC link software offers continuous recording to a PC and conversion from .dt file to .text/.csx file format.
| Model | LE-1500R | |
|---|---|---|
| Interface | Standard | RS-232C, RS-422/485, and TTL(1.8V-5V signal level UART) |
| Optional | RS-530, Current loop | |
| Protocol | ASYNC, PPP(ASYNC) | |
| Capture Memory | 64Mbyte | |
| Baud Rate | 50bps to 500Kbps, Freely set to 4 effective digits separately for transmission and reception. | |
| Online Monitor | Displays communication logs on the LCD at real time without affecting the communication line. | |
| Trigger Function | 4 pairs of trigger condition and action can be specified. External trigger (1 input and 2 outputs) | |
| Simulation Function | 3 Modes (Manual mode, Echo back mode, and Flow control mode) | |
| BERT Function | Measures a line quality such as the error rate and block error rate, confirming to the G.821 (IUT-T advise). | |
| Other Functions | Logic analyzer function of max 50nS resolution and measurement function of RS-232C/TTL signal voltage swing | |
| Storage Media | SD card*1 and USB flash Max.16Gbyte | |
| External Interface | USB2.0AAUX(RS-232C)AWi-Fi*2 | |
| Power | DC 9V Nickel hydrogen battery (Operation time: about 7hours*3), Provided wide AC adapter: Input AC 100-240V | |
| Dimension/Mass | 210(W)~154(D)~38(H)mmA760g | |
| Accessories | onitor cable for DSUB 25-pin (LE-25M1), AC adapter (6A-181WP09), carrying bag (LEB-01), Utility CD, Quick start guide, and warranty | |
| New Model LE-1500R |
Conventional Model LE-1500 |
|
| RS-232C/422/485 | OK | OK |
| TTL (1.8V-5V signal) | OK | [OP-SB5GL] is needed |
| RS-530 | [OP-SB10N] is needed | OK |
| Capture memory | 64MB | 2.4MB |
| Full duplex Half duplex |
500Kbps 500Kbps |
500Kbps 500Kbps |
| Simulation function | 3 modes | 3 modes |
| RS-232C signal voltage measurement | OK | OK |
| TTL signal voltage measurement | OK | NO |
| CF card | NO | Max. 8Gbyte |
| SDHC card | Max. 16Gbyte | NO |
| USB flash | Max. 16Gbyte | NO |
| Wi-Fi | 802.11 b/g/n | NO |
| Dimension (WxDxH) | 210x154x38mm | 210x154x38mm |
| Mass | About 760g | About 760g |
Email: Contact Us