LAN ⇔ RS-422/485
Interface Converter


●Connects 10Base-T/100Base-TX by auto-detection.
●Supports multi protocols such as TCP/IP, UDP/IP, ARP, etc.
●Automatically controls RS-485 communications, which is available to use the flow control of XPort®.
●Able to control 128sets maximum in RS-485 multi-drop type.
●Can use in the workplace environments between -10 to 50 degree Celsius.
●Solid, card-case sized, and metal enclosure.
●Supports installation of 35mm DIN rail.
●Environment-friendly design. Use lead-free solder. Non-use of chromium screw etc.

SI-65: Japanese model (100V Input AC adapter)
SI-65-E: World wide model (Wide Input AC adapter )

Item Appearance Name Remarks
DIN Plate SI-DIN70 Uses for installing 35mm DIN rail.
DIN Plate SI-DIN30S Uses for installing vertically to 35mm DIN rail.
Magnet SI-MG70 Two magnets to attach the SI/LANIO-series on the wall. Screw two magnets on the bottom of device.
Wall bracket SI-WM1 Metal fitting to attach the device on the wall. Screw the meal fitting board on the bottom of device.
AC adapter ACアダプタ VFN-650B

Input: AC100V, 50/60Hz
Output: DC6V, 500mA
Plug: Center minus, 5.5mm (external), 2.1mm (internal)
Standard: PSE


Noise resistance

* Same as attached one.
AC adapter for SI-series GF12-US0618

Input: AC100-240V, 50/60Hz
Output: DC6V, 1.8A
Plug: Center minus, 5.5mm (external), 2.1mm (internal)

*Small, low cost AC adapter
Wide Input AC adapter 6A-181WP09 Input: AC100-240V, 50/60Hz
Output: DC9V, 2A
Plug: Center plus, 5.5mm (external), 2.1mm (internal)
* Same as AC adapter packaged with world wide model
Power plug cable SIH-2PG DC plug 2.1mm (5.5mm outside)-Y terminal (1.8m)
For the external DC power supply connection to the DC-IN terminal.
The cable clamp attachment is included.