Expansion Adapter for LE

OP-1C Adapter for Current Loop

Interface Circuit	Current loop
Signal Line	SD, RD
Transmission Rate (bps)	MAX. 19.2Kbps
Power Level	Passive: 10-60mA active: 20mA, 40mA
Functions	Monitoring/ Simulation (Passive/Active)
Change dip switch	Passive/Active, 20mA/40mA select
Power Supply	Supplied from analyzer
Dimensions (mm)	60(W) x 100(D) x 20(H)
Weight(g)	180
Accessories	Interconnecting cable

OP-2B Adapter for RS-422/485 Discontinued

Interface Circuit	RS-422/485
Signal Line	SD, RD, RS, CS
Transmission Rate (bps)	MAX. 115200
Lead Status LEDs	SD, RD
Functions	Monitoring/ Simulation Selectable line termination by switch Selectable three driver enabled states by switch
Power Supply	Supplied from analyzer
Dimensions (mm)	60(W) x 100(D) x 20(H)
Weight(g)	180
Operating Environment	Temperature 0 to 40 degree Celsius Humidity 80% max.
Accessories	Interconnecting cable (LE26-OP) RS-422 monitor cable (LE-009M1)

OP-5C TTL Monitor Probe Pod Discontinued

Interface Circuit		TTL level signal line
Functions		Monitoring/Simulation
Input	High level threshold value	Approx. 2.2V
	Low level threshold value	Approx. 0.9V
Output	High level threshold value	Approx. 2.7V
	Low level threshold value	Approx. 0.5V
Polarity Inversion		Adjustable by dip swhitch
Input Impedance		100k ohm(0V<= VIn <=5V) 10k ohm(Vin < 0V,5V < Vin)
Max. Input Voltage		-25V to +25V
Trigger Output		TTL level
Electric Power		Supplied from analyzer
Demensions(mm)		78(W) x 92(D) x 22(H)
Weight(g)		240
Lengh of Probe Lead		170mm
Length of Cable		800mm
Operating Environment		Temperature 0 to 40 degree Celsius Humidity 80% max.
Accessories		Interconnecting cable (LE26-OP)