PRODUCT

Measurement
Port		 2 ports of Ethernet 10Base-T/ 100Base-TX (RJ-45 connector) Auto MDI/MDI-X supported*1
PC connection port USB2.0 High Speed Mini USB Port *2
LED Display for power ON/OFF, TAP/PG, Link/Tx of PortA/B, Rx/Err of PortA/B,
Time Stamp Add a time stamp every time receiving data frame. (unit: 1us, max: 57min)*3
TAP mode Capture full-duplex packet data on PortA and PortB which are through-connected. Packet data will be transmitted to the PC adding the time stamp information etc.
Function of LE-580FX Window (software)*4:
Display the captured packet data (filtering available)*5. Display the statistic data of packets*6. Save automatically to the specified file*7. Export to EXCEL format. Save automatically in the Ethereal/Wireshark format(.enc). Traffic check function. Display in Japanese/English.*13
Use with Ethernet Analysis Software, Ethereal/Wireshark
Able to control LE-580FX by using Ethereal/Wireshark*8
PG mode Generate test packets max. at 100Mbps line-rate from Port A or PortB individually.
Function of LE-580FX Window (software)*4:
Set up the transmission type (10/100M, full/half duplex, Auto), transmitting rate, flow control ON/OFF, transmission continuously or selected times (max. 65535), 2 to 7 layer (max. 128 frames*9, able to use captured data as transmitting data, select VLAN/MPLS). Add errors (CRC error, Alignment error, Dribble error, IP Checksum error)
Function of LE-580FX QoS (software)*4:
Transmit test frames (max. 8 frame lines) from PortA(B) to PortB(A). Set up the test time (5-3600s), VLAN tags, line-rate for transmission, bandwidth by pause packets. Measure received line rate, frame loss rate and latency time. Provide trend time chart (color edit available). Display statistic data. Save measured data.
NIC mode Use PortA or PortB as NIC (Network Interface Card)
Temperature 0 to 40°C(operation), -10 to 50°C(storage), Below 85%RH (no condensation)
Power USB bus power (max.3W)*10
Dimension and Weight 95(W)x75(D)x20(H)mm, 180g
CE CE approval (EMI: Class A)
PC PC/AT compatible with USB2.0 port.
Pentium 4 1.6GHz or more. Memory 256MB or more. HDD capacity 10G or more.*11
OS Windows® 2000/XP/Vista
Windows® 7/8/8.1/10 (each 32/64bit)*12*13
Accessories Analyzer, Utility CD, USB 2way cable, manuals, warranty.
*1  Automatically distinguish between cross cable and straight cable.
*2  Only one LE-580FX can be used for one PC.
*3  The time stamp value may be affected by the processing timing of PC.
*4  WinPcap4.1.3 will be installed.
*5  LE-580FX captures max. 64-1536 byte of packets in TAP mode includes CRC. (48-2032 byte in PG mode)
*6  Statistic data will not be affected by the performance of PC.
*7  Able to capture max. at 90Mbps in half duplex and 120Mbps in full duplex without any data loss. However, it will be affected by the performance of PC or USB. LE-580FX Window (LE-580FX Window V1.5 or later) captures max. 250,000,000 frames continuously. With different software, it will be different.
*8  LINEEYE will not support any issue about Ethereal/Wireshark.
*9  LE-580FX Window transmits packets max. at 2004 byte, includes CRC.
*10 Use 2way cable if you have power shortage. Provide the power source from 2 USB ports.
*11 It is recommended to have more capacity in HDD to capture large amount of packets.
*12 There is a different driver for Windows® 2000/XP, Windows® Vista, Windows® 7 and Windows® 8/8.1/10. Please read "LE-580FX User Manual".
*13 LE-580FX Window V1.5 or later support for Windows 8 or later.