Firmware Version History for LE-3500/LE-2500

Correct the bug that analyzer measures data in duplicate when speed is more than 500Kbps.

Add the function which makes the external triger output active.
Add the settings for "OP-SB5GL" in the "INTERFACE" setting menu.
Add the speed of 50Kbps, 200Kbps, 417Kbps for I2C master simulation.
Correct the bug of incomplete bit in the SPI slave simulation.
Change the beginning point to start the SPI slave simulation repeat mode as CS falling.
Add the inter lock for starting measurement when TTL/IrDA pots are not connected.
Strengthen the self-check function.
Correct the miner bug of firmware loader.

Add a display mode for ASYNC frame per a time stamp
Support monitoring/simulating SPI protocol (need OP-SB5G)
Add the function for receiving/transmitting Simulation programs to a PC efficiently.
Correct miner bug of changing display code when turning of the power.
Correct the bug that “Invert” in the “Interface” on Simulation mode does not work.
Fix the calculation process of baud rate clock.

Add the function of time differences for timestamp (H/M/S, M/S/10ms) in the translation display mode. (Press [SHIFT]+[TIME/COUNT] to change the display mode. Cannot change the display mode during the measurement.
Fix the problem of asynchronous in the BERT test pattern 63.
Fix the problem of cursor key process in the file save setting screen.
Add the function of battery diagnosis in the self diagnosis function. (Press [1]+[D] while turning on the power.)

LE-3500/2500 released